LSAW PIPE & TUBE MILL
LSAW PIPE
Pipe Diameter Range
9"-250"
Pipe Length: 12MWall Thickness: 6mm-80mm
SQUARE TUBE
Size Range
200 x 200mm - 800 x 800mm
Pipe Length: 6M -12MWall Thickness: 8mm-40mm
RECTANGULAR TUBE
Size Range
200 x 150mm - 800 x 750mm
Pipe Length: 6M -12MWall Thickness: 8mm-40mm
Embosal can also produce other non standard size/thickness as per customer requirement. Please contact us in, case the required size of Pipes and Tubes are not in the chart.
Standards
This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
This part of EN 10219 specifies tolerances for cold formed welded circular, square and rectangular structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size ranges:
Click here for More Details
This part of this European Standard specifies technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product. Requirements for tolerances,dimensions and sectional properties are contained in EN 10210-2.
Click here for More Details
This part of EN 10210 specifies tolerances for hot finished circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 120 mm, in the following size ranges:.
Click here for More Details
This specification covers cold-formed welded and seamless carbon steel round, square, rectangular, or special shape structural tubing for welded, riveted, or bolted construction of bridges and buildings, and for general structural purposes.
Click here for More Details
This specification2 covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1⁄8 to NPS 26 [DN 6 to DN 650] (Note 1), inclusive, with nominal wall thickness. It shall be permissible to furnish pipe having other dimensions provided that such pipe complies with all other requirements of this specification.
The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries. This specification covers seamless and welded steel line pipe. It includes plain-end, threaded-end, and belled-end pipe, as well as through-the-ftowline (TFL) pipe and pipe with ends prepared for use with special couplings.